Our Products
Brand: AIRCRAFT
MPN: SG777-03
FRONT & REAR BEARING FOR SG777 COMPRESSOR....
N$ 64.17
Ex VAT:N$ 55.80
Brand: AIRCRAFT
MPN: AT0016-17
AirCraft AT0016-17 Front Bearing For Air Ratchet Wrench
At a Glance: Replacement front ball bearing for the AirCraft AT0016 air ratchet—supports the drive end for smooth, low-friction running.
A front bearing is one of those parts you only notice when it starts complaining—noise, vibration, roughness, or a tool that just doesn’t feel as smooth under load. The AirCraft AT0016-17 Front Bearing is a precision replacement bearing for the AirCraft Air Ratchet Wrench (AT0016 series), supportin..
N$ 48.76
Ex VAT:N$ 42.40
Brand: AIRCRAFT
MPN: AT0015-17
AirCraft Front Bearing for Air Ratchet Wrench 3/8" (AT0015-17) for Model AT0015
At a Glance: Genuine front bearing spare part for the AirCraft AT0015 3/8" air ratchet wrench—supports stable rotation and smooth motor/drive operation.
The AirCraft AT0015-17 front bearing is a critical support component in the AT0015 3/8" air ratchet wrench, helping the rotating assembly run true and smoothly at the front end of the motor/drive system. When a bearing starts to fail, the signs usually arrive as ex..
N$ 48.76
Ex VAT:N$ 42.40
Brand: AIRCRAFT
MPN: AT0017-32
AirCraft Front Cover for Air Die Grinder 6mm Mini (AT0017-32)
At a Glance: Replacement front cover for the AirCraft AT0017 6mm Mini Air Die Grinder—protects the front assembly and helps keep parts seated and tidy.
The AirCraft AT0017-32 Front Cover is the protective cap that fits over the front end of the AT0017 6mm Mini Air Die Grinder. It helps shield the front assembly from dust and workshop debris, while also giving the tool a cleaner, more finished feel in the hand.
If your..
N$ 7.82
Ex VAT:N$ 6.80
Brand: AIRCRAFT
MPN: AT0017-27
AirCraft Front Plate for Air Die Grinder 6mm Mini (AT0017-27)
At a Glance: Replacement front plate for the AirCraft AT0017 6mm Mini Air Die Grinder—supports internal motor alignment and stable high-speed rotation.
The AirCraft AT0017-27 Front Plate is a precision internal component used in the pneumatic motor assembly of the AT0017 6mm Mini Air Die Grinder. Together with the cylinder, rotor, and rear plate, the front plate helps define correct spacing and support so the motor can spi..
N$ 40.71
Ex VAT:N$ 35.40
Brand: AIRCRAFT
MPN: AT0016-16
AirCraft AT0016-16 Front Plate For Air Ratchet Wrench
At a Glance: Replacement front/end plate that helps keep the AirCraft AT0016 air ratchet motor aligned for smooth, efficient running.
The front plate is one of the precision “bookends” of your air ratchet’s motor—supporting rotating parts and keeping everything running true. The AirCraft AT0016-16 Front Plate is a replacement end plate for the AirCraft Air Ratchet Wrench (AT0016 series). If a plate becomes worn, scored or damaged, it ..
N$ 85.33
Ex VAT:N$ 74.20
Brand: TORK CRAFT
MPN: TC20180-SK06
Tork Craft Front Support & Spring Shim Kit (30-33/58) For TC20180 RS25 20V Reciprocating Saw
At a Glance: Front support and spring shim service kit for the TC20180 RS25 20V reciprocating saw
The front end of a reciprocating saw works hard on every cut, guiding the blade and absorbing vibration. Over time, the support and
spring shims can wear, loosen or become damaged. The Tork Craft TC20180-SK06 Front Support & Spring Shim Kit gathers the key parts from
positions 30–33 and 58 into one g..
N$ 100.74
Ex VAT:N$ 87.60
Brand: PRO-TECH
MPN: KP316021
Full
Bead
Carbide
Tipped
This router bit shape is also referred to as the leaf corner profile. In one
pass, this bit forms a round-edge groove near the corner of the workpiece. A second
pass on the adjoining face yields a delicate leaf shaped corner bead. More profiles
can be created using this router bit using some imagination.
The two bearings allows for both router table and freehand use.
Round edge groove
Leaf shaped corner bead
Corner round profile with 4,80mm ra..
N$ 655.50
Ex VAT:N$ 570.00
Brand: PRO-TECH
MPN: KP5
Spindle
cutter - Full bead/Half round/Bull nose 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut full beads, half rounds or a bull nose.
KP800020 - 3/4' - 1/2' spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2' or 3/4'
spin..
N$ 1,294.33
Ex VAT:N$ 1,125.50